AD-1672 / AD-1672A

Tabletop Breeze Break

Strongly recommended for micro-level weighing

 

Laboratories are typically kept at a constant temperature by air conditioning. Contrary to what you may believe, a strict temperature control can adversely affect the stability of a micro analytical balance when the air conditioning causes strong air circulation and minute repeated temperature fluctuations around the set temperature.

The AD-1672 / AD-1672A is effective in shielding your balance from such disturbances.

AD-1672: Standard tabletop breeze break
AD-1672A: Tabletop breeze break with inclined front beam panel

AD-1672 Manual Book
AD-1672A Manual Book

Category:

Features

  • Shields a highly sensitive analytical balance from breezes and minute temperature changes caused by air conditioning or people passing by.
  • Consists of antistatic plastic panels to minimize the effect of static electricity on the balance
  • Possible to pass RS-232C and AC adapter cables through two guides at the bottom of the back side
  • Ready to assemble and easy to move from one location to another
With a BM-20 microbalance and an AD-1671 anti-vibration table

Specifications

Related products

  •

    AD-8526

    Serial / Ethernet Converter

    The AD-8526 can connect the RS-232C interface of an A&D weighing
    instrument to the Ethernet (LAN) port of a computer that is not equipped
    with an RS-232C interface.

    Manual Book

  •

    AD-8923-CC

    Remote Controller for the AD-4212C Series (CC-Link)

    The AD-8923-CC is an exclusive remote controller for the AD-4212C Series
    that can transmit weighing data to a PLC using CC-Link, in addition to displaying
    the weighing data, setting the weighing speed, and performing calibration.

     

    Manual for AD-8923-CC
    Manual for AD-8923-BCD

  •

    AD-4541-V/I

    Analog signal conditioner

    Ultra-slim analog signal conditioners

     

    Analog signal conditioners can convert the signal received from a bridge type sensor such as a load cell, pressure sensor, strain gauge, etc. to a voltage output (AD-4541-V / -2V to +2V) or a current output (AD-4541-I / 4-20mA).

    Brochure | Manual Book

  •

    AD-1684

    Electrostatic Field Meter

    The AD-1684 is an electrostatic field meter designed for detecting the existence of static electricity, which is often the cause of inaccurate weighing.

     

    The AD-1684 can be used for measuring the electrostatic charge of measured objects or on automated factory lines, and for confirming the effect of a static eliminator (e.g. the AD-1683).