AD-8923-CC

Remote Controller for the AD-4212C Series (CC-Link)

The AD-8923-CC is an exclusive remote controller for the AD-4212C Series
that can transmit weighing data to a PLC using CC-Link, in addition to displaying
the weighing data, setting the weighing speed, and performing calibration.

 

Manual for AD-8923-CC
Manual for AD-8923-BCD

Category:

Features

  • CC-Link as a standard I/O, enabling simple wiring and reliable communication
  • Easy to build up a production line weighing system in combination with the AD-4212C weighing sensor
  • Connection of up to 41 weighing sensors to a network
  • Compact size to fit into a narrow space
  • Possible to receive power from the connected weighing sensor (and vice versa)
  • The AD-8923-BCD, which has a BCD as a standard I/O, is also available

Specifications


* Half-pitch 50-pin (female) BCD connector for the AD-8923-BCD

Related products

  •

    AD-8526

    Serial / Ethernet Converter

    The AD-8526 can connect the RS-232C interface of an A&D weighing
    instrument to the Ethernet (LAN) port of a computer that is not equipped
    with an RS-232C interface.

    Manual Book

  •

    AD-4541-V/I

    Analog signal conditioner

    Ultra-slim analog signal conditioners

     

    Analog signal conditioners can convert the signal received from a bridge type sensor such as a load cell, pressure sensor, strain gauge, etc. to a voltage output (AD-4541-V / -2V to +2V) or a current output (AD-4541-I / 4-20mA).

    Brochure | Manual Book

  •

    AD-1691

    Weighing Environment Analyzer

    For SOP-based management of balance quality and performance

     

    • Easy operation by following step-by-step guidance on a color touch-panel screen
    • Daily balance check to confirm that the balance meets proper conditions for use
    • Periodic balance check including tests for repeatability, accuracy/linearity, and eccentricity error

    Brochure | Manual Book

  •

    AD-8922A

    Remote Controller

     

    Data received from the weighing instrument can be also output to PC or printer via RS232C interface(DIN connector) on AD8922.

     

    AD-8922 is a remote controller that can be connected to certain A&D weighing instruments in order to display weighing data and control the weighing instrument with key operation.
    (Access to the internal setting of weighing machine is not allowed.)

    Manual Book