RV-10000A

Features

Repeatability as high as 1% of the measured value (by S.D.) even with low viscosity sample fluids
Shear rate changes by controlling the sensor plate vibration amplitude
Easy setup/cleaning and very quick measurement (stabilization in 20 seconds)
Wide continuous measurement range (max. 0.3 to 25,000 mPa·s)
Little interference to the sample fluid
Possible to measure fluids in motion
Comes with a special controller for:
- Automatically changing the amplitude (shear rate) and capturing data in the manner set by the user
- Real-time graphing of viscosity variation with time, temperature, as well as shear rate
- Saving results (in CSV format) and graph screens (as JPEG images) in USB flash drives
User calibration function, including a simplified calibration using purified water
Sample fluid temperature control using the provided water jacket
Anti-corrosive, titanium sensor plates and temperature sensor
X-Y-Z stage, anti-vibration table (AD-1671A), positioning stopper, etc., as standard accessories

External Input / Output

RS-232C interface
USB (1.1) interface

Accessories


Item	Description	RV-10000A RV-10000	SV-10	SV-100	SV-1A	SV-10A	SV-100A
AX-SV-33	Sample cup, 45 ml, polycarbonate × 10	●	●	●	●	●	●
AX-SV-34	Small sample cup, 10 ml, with cover, polycarbonate × 10	●	●	●	●	●	●
AX-SV-35	Glass sample cup, 13 ml × 1	●	●	●	●	●	●
AX-SV-36	Positioning stopper × 1	●	●	●	●	●	●
AX-SV-37	Water jacket × 1, small sample cup with cover × 4	●	●	●	●	●	●
AX-SV-38	Storage container, 60 ml, glass × 10	●	●	●	●	●	●
AX-SV-39	Storage container, 120 ml, plastic × 20	●	●	●	●	●	●
AX-SV-42	Analog voltage output (0 to 1V)	●	●	●	●	●	●
AX-SV-43	Extension cable (5 m) to connect the main unit and the display unit	●	●	●	●	●	●
AX-SV-51	Stand set with X-Y-Z stage	●	●	●	●	●	●
AX-SV-52	X-Y-Z stage × 1	●	●	●	●	●	●
AX-SV-53-EX	Software set	●	●	●	●	●	●
	(WinCT-Viscosity × 1, 25P-9P RS-232C cable × 1,
	serial/USB converter × 1)
AX-SV-54	Cup set for RV-10000/RV-10000A/SV-10A/100A	●	●	●	●	●	●
	Sample cup:
	45 ml, polycarbonate × 5
	10 ml, with cover, polycarbonate × 5
	13 ml, glass × 2
	Glass sample cup holder, stainless steel × 1
	Water jacket × 1
AX-SV-55	Cup Set for SV-1A				●
	Sample cup:
	45 ml, polycarbonate × 5
	2 ml, with lid, polycarbonate × 10
	2 ml, glass × 10
	2ml sample cup holder, polycarbonate:
	Transparent × 3
	Black × 2
	2 ml sample cup stand × 1
	Water jacket × 1
AX-SV-56-1	2 ml sample cup holder, polycarbonate, transparent × 5				●
AX-SV-56-2	2 ml sample cup holder, polycarbonate, black × 5				●
AX-SV-57	2 ml sample cup stand × 2				●
AX-SV-58	Sample cup, 2 ml, with lid, polycarbonate × 100				●
AX-SV-59	Glass sample cup, 2 ml × 5				●
	2 ml sample cup stand × 1
AX-SV-60	Square sample cup, 2 ml, glass × 2				●
AX-SV-62-1	Dust cover for the sensor and stand units	●	●	●	●	●	●
AX-SV-62-2	Dust cover for the display unit and controller*	●	●	●	●	●	●
AX-USB-25P-EX	Serial/USB converter	●	●	●	●	●	●
AD-8121B	Compact printer	●	●	●	●	●	●
AD-1682	Rechargeable battery	●	●	●	●	●	●
AD-1671A	Anti-vibration table for viscometers/rheometers	●	●	●	●	●	●
AX-SV-31-2.5	Standard liquid for calibration JS2.5 (500 ml)	●	●		●	●
AX-SV-31-5	Standard liquid for calibration JS5 (500 ml)	●	●		●	●
AX-SV-31-10	Standard liquid for calibration JS10 (500 ml)	●	●		●	●
AX-SV-31-20	Standard liquid for calibration JS20 (500 ml)	●	●		●	●
AX-SV-31-50	Standard liquid for calibration JS50 (500 ml)	●	●		●	●
AX-SV-31-100	Standard liquid for calibration JS100 (500 ml)	●	●		●	●
AX-SV-31-200	Standard liquid for calibration JS200 (500 ml)	●	●			●
AX-SV-31-500	Standard liquid for calibration JS500 (500 ml)	●	●			●
AX-SV-31-1000	Standard liquid for calibration JS1000 (500 ml)	●	●			●
AX-SV-31-2000	Standard liquid for calibration JS2000 (500 ml)	●		●		●
AX-SV-31-14000	Standard Liquid for Calibration JS14000 (500 ml)	●		●			●
AX-SV-31-160000	Standard Liquid for Calibration JS160000 (500 ml)			●			●

Specifications


Measurement method	Tuning Fork Vibro Method (Natural Frequency at 30Hz)
Amplitude range	0.07 to 1.2 mm (peak-to-peak at the tip of the sensor plate)
Measurable viscosity range*1	0.07 mm ≤ amplitude < 0.1 mm	2,000 to 25,000 mPa·s
	0.1 mm ≤ amplitude < 0.2 mm	20 to 25,000 mPa·s
	Amplitude = 0.2 mm	0.3 to 25,000 mPa·s
	0.2 mm < amplitude ≤ 0.4 mm	0.3 to 12,000 mPa·s
	0.4 mm < amplitude ≤ 0.8 mm	0.3 to 5,000 mPa·s
	0.8 mm < amplitude ≤ 1.2 mm	0.3 to 3,000 mPa·s
Repeatability23	1% of the measured value (standard deviation)
Accuracy24	±3% (1 to 1000 mPa•s) when the amplitude is set to 0.4 mm
Minimum display	Range (mPa·s)	Minimum display (mPa·s)	Minimum display (Pa·s)
	0.3 to 10	0.01	0.0001
	10 to 100	0.1	0.0001
	100 to 1000	1	0.001
	1000 to 25000	10*5	0.01
Viscosity measurement unit	mPa·s, Pa·s, cP, P
Minimum sample amount	10 ml
Temperature measurement	0 to 99°C/0.1°C (32 to 210.2°F/0.1°F); 100 to 160°C/1°C (212 to 320°F/1°F)
Display	Vacuum Fluorescent Display (VFD)
Power supply / consumption	AC adapter / approx. 14 VA (including the AC adapter)
External dimensions / weight	Sensor unit: 112 (W) × 132 (D) × 291(H) mm / approx. 0.8 kg
	Display unit: 238 (W) × 132 (D) × 170 (H) mm / approx. 1.3 kg
	Stand unit: 296 (W) × 314 (D) × 536 (H) mm / approx. 4.6 kg
Standard accessories	AC adapter × 1, connection cable × 1, sample cup (capacity: 45 ml) × 5, small sample cup (capacity: 10 ml) × 5, small sample cup cover × 5, glass sample cup (capacity: 13 ml) × 2, glass sample cup holder × 1, water jacket × 1, WinCT-Viscosity × 1, RS-232C cable × 1, serial/USB converter × 1, stand for securing the sensor unit × 1, X-Y-Z stage × 1, positioning stopper × 1, anti-vibration table × 1

*1 The basic model (RV-10000) has no controller section and the sensor plate amplitude can only be altered to eight levels (0.07 / 0.1 / 0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 mm) by manually pressing a key on the display unit.
*2 When the sample cup (45 ml) is used.
*3 Repetitive measurement with the sensor plates remaining in the sample fluid
*4 The value after calibration using a viscosity standard liquid at a temperature range between 20°C and 30°C with no condensation
*5 The unit switches to Pa·s.

Controller Section


Display	TFT color LCD with backlight (7 inches, 800 × 480 dots)
Data transmission	RS-232C × 3, USB (1.1) × 2*6
Power supply / consumption	AC adapter / approx. 30 VA
External dimensions	203 (W) × 153 (D) × 58 (H) mm, excluding protrusions
Net weight	Approx. 1.1 kg
Standard accessories	AC adapter × 1, touch pen with holder × 1, stand attachment × 1

*6 For inserting USB flash drives only (the two slots cannot be used at the same time)

Product

Tuning Fork Vibro Rheometer

Finally, a cure for poor repeatability in low viscosity measurements

Features

External Input / Output

Accessories

Specifications

Controller Section

Jakarta

Cikarang

Surabaya

Semarang

Social Media

Medan

Shop Online

Product

RV-10000A

Tuning Fork Vibro Rheometer

Finally, a cure for poor repeatability in low viscosity measurements

Features

External Input / Output

Accessories

Specifications

Controller Section

Download