Junction Box
- For extending load cell cable to reach a weighing indicator
-
AD-4382
Summing Box
- Accepts cable from up to two load cells
- Adjusts the gain for each load cell
- Sends the signal to a weighing indicator
-
AD-4541-V/I
Analog signal conditioner
Ultra-slim analog signal conditioners
Analog signal conditioners can convert the signal received from a bridge type sensor such as a load cell, pressure sensor, strain gauge, etc. to a voltage output (AD-4541-V / -2V to +2V) or a current output (AD-4541-I / 4-20mA).
-
.jpg)
AD-8118C
Universal Printer
The AD-8118C is a universal printer designed for connection with indicators, scales and electronic balances.
-
AD-8127
Compact Printer
Multi-Functional Compact Printer for Balances/Scales
Manual Book | Connecting Balance
Connecting Moisture Analyzers | Flyer
Connecting Viscometers
Supported Connection Table (balances, scales and others)
Supported Connection Table (indicators) -
AD-8526
Serial / Ethernet Converter
The AD-8526 can connect the RS-232C interface of an A&D weighing
instrument to the Ethernet (LAN) port of a computer that is not equipped
with an RS-232C interface. -
AD-8527
Quick USB Adapter
The AD-8527 transfers weighing data to a PC in real time via an RS-232C connection with a weighing instrument and a USB connection with a PC.
To change the internal settings of the AD-8527, please download the AD-8527
Setting Tool:Readme (This enables a PC without COM ports to receive data) -
AD-8529PC/PR-W
Bluetooth Converters
The AD-8529PC/PR-W Bluetooth converters enable wireless communication between a balance/scale and a PC/printer using low-energy Bluetooth (line-of-sight distance approx. 10 m when there is no radio wave interference).*2
Pairing is unnecessary so data transfer can begin right away.
Manual Book
Connection compatibility table
Connection with the AD-4212D series
Connection with the AD-1691
Connection with the AD-8922A
Connection with the AD-8121B*1
AD-8529 Bluetooth® Converter*1 A&D no longer produces the AD-8121B compact printer and now offers the AD-8127 instead.
*2 Please contact your local A&D representative to find out whether the AD-8529PC/PR-W is certified for compliance with Bluetooth communication laws in your country. -
-300x300.png)
AD-8920A
Remote Display
Ideally suited for using a balance over the counter!
- Connects to A&s balances and scales using either RS-232C or current loop
- Includes an AC adapter and a communication cable that matches your instrument
- Recognizes the balance/scale baud setting automatically
- Large and bright VFD display
-
-300x300.png)
AD-8922A
Remote Controller
Data received from the weighing instrument can be also output to PC or printer via RS232C interface(DIN connector) on AD8922.
AD-8922 is a remote controller that can be connected to certain A&D weighing instruments in order to display weighing data and control the weighing instrument with key operation.
(Access to the internal setting of weighing machine is not allowed.) -
AD-8923-CC
Remote Controller for the AD-4212C Series (CC-Link)
The AD-8923-CC is an exclusive remote controller for the AD-4212C Series
that can transmit weighing data to a PLC using CC-Link, in addition to displaying
the weighing data, setting the weighing speed, and performing calibration. -
AX-HOLDER-SET
Sample Cup Holder Set
AX-HOLDER-SET is a set of three sample cup holders that are used to weigh test tubes, micro tubes, flasks or vials containing reagents or samples.
Drawing
Drawing