Showing 13–18 of 18 results

View

  • AD-8529PC/PR-W

    Bluetooth Converters

    The AD-8529PC/PR-W Bluetooth converters enable wireless communication between a balance/scale and a PC/printer using low-energy Bluetooth (line-of-sight distance approx. 10 m when there is no radio wave interference).*2 

    Pairing is unnecessary so data transfer can begin right away.

    Manual Book
    Connection compatibility table 
    Connection with the AD-4212D series
    Connection with the AD-1691
    Connection with the AD-8922A
    Connection with the AD-8121B*1
     AD-8529 Bluetooth® Converter

     

    *1 A&D no longer produces the AD-8121B compact printer and now offers the AD-8127 instead.
    *2 Please contact your local A&D representative to find out whether the AD-8529PC/PR-W is certified for compliance with Bluetooth communication laws in your country.

  •

    AD-8920A

    Remote Display

    Ideally suited for using a balance over the counter!

     

    • Connects to A&s balances and scales using either RS-232C or current loop
    • Includes an AC adapter and a communication cable that matches your instrument
    • Recognizes the balance/scale baud setting automatically
    • Large and bright VFD display

    Manual Book

  •

    AD-8922A

    Remote Controller

     

    Data received from the weighing instrument can be also output to PC or printer via RS232C interface(DIN connector) on AD8922.

     

    AD-8922 is a remote controller that can be connected to certain A&D weighing instruments in order to display weighing data and control the weighing instrument with key operation.
    (Access to the internal setting of weighing machine is not allowed.)

    Manual Book

  •

    AD-8923-CC

    Remote Controller for the AD-4212C Series (CC-Link)

    The AD-8923-CC is an exclusive remote controller for the AD-4212C Series
    that can transmit weighing data to a PLC using CC-Link, in addition to displaying
    the weighing data, setting the weighing speed, and performing calibration.

     

    Manual for AD-8923-CC
    Manual for AD-8923-BCD

  •

    AX-HOLDER-SET

    Sample Cup Holder Set

    AX-HOLDER-SET is a set of three sample cup holders that are used to weigh test tubes, micro tubes, flasks or vials containing reagents or samples.

    Manual Book

  •

    AX-SW128 / AX-SW137-PRINT / AX-SW137-REZERO

    Foot Switches for Balances/Scales

    Allows you to Print or Re-Zero without using your hands

     

    • Useful when it is difficult or undesirable to press a key directly on the balance/scale. For example,
    • Both of your hands are full.
    • The balance/scale is used in a glove box.
    • You don’t want to tilt or cause any tremor to a highly-sensitive balance, such as the BM-20/22 microbalance.