Showing 13–24 of 176 results

View

  • AD-1684A

    Electrostatic Field Meter

    The AD-1684A is an electrostatic fieldmeter designed for detecting the existence of static electricity, which is often the cause of inaccurate weighing.

     

    The AD-1684A can be used for measuring the electrostatic charge of measured objects or on automated factory lines, and for confirming the effect of a static eliminator (e.g. the AD-1683).

  •

    AD-1685

    Anti-Vibration Table for Viscometers

    The AD-1685 is an anti-vibration table that effectively isolates the SV-A Series viscometer from adverse
    vibration, enabling stable and accurate measurements.

     

    Depending on the measuring location, the highly sensitive tuning-fork vibration sensor (incorporated in our SV-A Series viscometers) can be adversely affected by low-frequency vibrations that cannot be detected by humans. For example, if the laboratory is located on the high story of a building or on unstable ground, such as near the seaside, vibration may well be generated by strong winds or high waves.

  •

    AD-1687

    Weighing Environment Logger

    Temperature, Humidity, Barometric Pressure, Vibration and Weighing Data – All in One Device!

     

    • Simultaneous and chronological recording of environmental and weighing data
    • Four kinds of environmental data: Temperature, humidity, barometric pressure, and vibration
    • Large memory capacity of 10,000 data sets

    Brochure | Manual Book
    Flyer for the Animal Body Temperature Logger

  •

    AD-1688

    Weighing Data Logger

    Save, carry, and retrieve!!

     

    The AD-1688 weighing data logger is a handheld device that lets you collect weighing data without connecting the balance or scale to a PC!
    Brochure | Manual Book

    To change the internal settings of the AD-1688, please download the AD-1688 Setting Tool:

    Readme (Please read before downloading the software.)
    AD-1688 Setting Tool (ZIP file 40KB).
    Weighing Data Logger Introduction

  •

    AD-1689

    Tweezers for Calibration Weight

    The AD-1689 is a pair of tweezers that are ideally suited for manipulating calibration weights (10 ~ 500g).

  •

    AD-1690

    Leak Tester

    For quick screening for pipette failures!

     

    Are you sure your pipettes are all accurate? Most pipette failures happen due to soiled or damaged parts compromising the airtightness of the pipettes. With the AD-1690 leak tester, you can instantly spot the pipettes that need to be fixed.

    Brochure | Manual Book
    Manual Addendum

  •

    AD-1691

    Weighing Environment Analyzer

    For SOP-based management of balance quality and performance

     

    • Easy operation by following step-by-step guidance on a color touch-panel screen
    • Daily balance check to confirm that the balance meets proper conditions for use
    • Periodic balance check including tests for repeatability, accuracy/linearity, and eccentricity error

    Brochure | Manual Book

  •

    AD-4212A

    Precision Weighing Sensor

    For maximum efficiency of your production line

     

    • Fast stabilization (0.8 sec. at 1 mg, 1.1 sec. at 0.1 mg)
    • Slim separate weighing sensor unit (80 mm width) for compact setups
    • Protection mechanism against vertical and transverse overloading due to actuator malfunctions, etc.

    Brochure | Manual Book
    OP-08 Manual Book
    Manual for WinCT-Plus
     High Speed AD-4212A precision weighing sensor

  •

    AD-4212B Series

    Analytical Weighing Sensors

    Analytical Weighing Sensors At last, 1 μg readability in production-line weighing

     

    • Minimum weighing value from 1 μg
    • Fast stabilization of 4.0 seconds for 0.01 mg resolution
    • Suitable for installation and weighing in vacuum chambers

    Brochure | Manual Book
    OP-08 Manual Book
    Manual for WinCT-Plus

  •

    AD-4212B-PT / AD-4212A-PT / FX-300i-PT

    Pipette Accuracy Testers

    For in-house management and recording of pipette accuracy

     

    Inaccurate pipetting can ruin all your research. However, having scores of pipettes checked regularly by an outside company is unnecessarily expensive. With A&D’s pipette accuracy testers, you can easily determine pipette accuracy by yourself whenever you want, based on any criteria – manufacturers’, ISO8655, or even your own.

     

    • Automatic mass-to-volume conversion and accuracy judgment using the special “WinCT-Pipette” software
    • Judgment by your preferred criteria – manufacturer specifications, ISO8655, or your own
    • Includes an evaporation trap to minimize errors due to evaporation

    Brochure | Manual Book
     Pipette Accuracy Testers and Leak Tester Introduction
     See how effective the evaporation trap is here

  •

    AD-4212C Series

    To those who wish to double production efficiency

    Just 5 mg after 30 million times!

     

    • Fast stabilization (0.5 sec. at 1 mg and 1.3 sec. at 0.1 mg)
    • Slim size (59 mm width) for installation in narrow spaces
    • Direct digital data output to a panel computer, PLC, or PC via RS-232C

    Brochure | Manual Book
    AD4212C material table
    Demonstration of fast stabilization

  •

    AD-4212D Series

    Micro Analytical Weighing Sensors

    High Resolution, High Stability, Space-Saving And Cost-Saving

     

    • Minimum weighing value from 1 µg
    • EM-DLC
    • Compact size and resistance to vacuum state ideal for use in a glove box

    Brochure | Manual Book
    Manual for the AD-1675 Tabletop Breeze Break