Showing 1–12 of 139 results

View
  • AD-1671

    Anti-Vibration Table for Balances

    Strongly recommended for micro-level weighing

     

    Microbalances are especially susceptible to minute vibrations, which often cannot be sensed by humans. Such vibrations can be caused by strong winds swaying the building, outside traffic, nearby machines in operation, opening/closing of doors, people passing by, and even very distant earthquakes.

    To a large extent, problems arising from vibrations can be avoided by simply using the AD-1671 anti-vibration table.

    Manual Book

  • AD-1671A

    Anti-Vibration Table for Viscometers/Rheometers

    Especially effective when performing low viscosity (10 mPa•s or below) measurements

     

    Depending on the measuring location, the highly sensitive tuning fork vibro sensor (incorporated in our SV-A series viscometers and RV-10000 rheometer) can be adversely affected by low-frequency vibrations that cannot be detected by humans. For example, if the laboratory is located on the high story of a building or on unstable ground, such as near the seaside, vibration may well be generated by strong winds or high waves.

    Manual Book

  • AD-1672 / AD-1672A

    Tabletop Breeze Break

    Strongly recommended for micro-level weighing

     

    Laboratories are typically kept at a constant temperature by air conditioning. Contrary to what you may believe, a strict temperature control can adversely affect the stability of a micro analytical balance when the air conditioning causes strong air circulation and minute repeated temperature fluctuations around the set temperature.

    The AD-1672 / AD-1672A is effective in shielding your balance from such disturbances.

    AD-1672: Standard tabletop breeze break
    AD-1672A: Tabletop breeze break with inclined front beam panel

    AD-1672 Manual Book
    AD-1672A Manual Book

  • AD-1682

    Rechargeable Battery Unit

    With this unit, an A&D weighing product can be operated in an environment where a power source is not available.

     

    The AD-1682 is a rechargeable battery unit exclusively designed for A&D’s weighing products.

    With this unit, an A&D weighing product can be operated in an environment where a power source is not available.

     

    • Charging Time: Approximately 15 hours
    • Battery type: Nickel-Metal-Hydride (Ni-MH)
    • Function: Charging with timer function for automatic stoppage
    • Output Cable Length: Approximately 1 meter

    Manual Book

  • AD-1683

    Static Eliminator

    AD1683 static eliminator, which incorporates a high-voltage power source, is a DC power-operated small-size device which can eliminate static electricity from charged objects without the need of an external high-voltage power source. Since this static eliminator is compact and lightweight with no fan (no breeze is produced)
    and requires no high-voltage wiring, it is very easy to handle.Being of a DC type, it has a remarkable ability for generating ions.

    Manual Book
     Anti static demo with analytical balances

  • AD-1684

    Electrostatic Field Meter

    The AD-1684 is an electrostatic field meter designed for detecting the existence of static electricity, which is often the cause of inaccurate weighing.

     

    The AD-1684 can be used for measuring the electrostatic charge of measured objects or on automated factory lines, and for confirming the effect of a static eliminator (e.g. the AD-1683).

  • AD-1684A

    Electrostatic Field Meter

    The AD-1684A is an electrostatic fieldmeter designed for detecting the existence of static electricity, which is often the cause of inaccurate weighing.

     

    The AD-1684A can be used for measuring the electrostatic charge of measured objects or on automated factory lines, and for confirming the effect of a static eliminator (e.g. the AD-1683).

  • AD-1685

    Anti-Vibration Table for Viscometers

    The AD-1685 is an anti-vibration table that effectively isolates the SV-A Series viscometer from adverse
    vibration, enabling stable and accurate measurements.

     

    Depending on the measuring location, the highly sensitive tuning-fork vibration sensor (incorporated in our SV-A Series viscometers) can be adversely affected by low-frequency vibrations that cannot be detected by humans. For example, if the laboratory is located on the high story of a building or on unstable ground, such as near the seaside, vibration may well be generated by strong winds or high waves.

  • AD-1687

    Weighing Environment Logger

    Temperature, Humidity, Barometric Pressure, Vibration and Weighing Data – All in One Device!

     

    • Simultaneous and chronological recording of environmental and weighing data
    • Four kinds of environmental data: Temperature, humidity, barometric pressure, and vibration
    • Large memory capacity of 10,000 data sets

    Brochure | Manual Book
    Flyer for the Animal Body Temperature Logger

  • AD-1688

    Weighing Data Logger

    Save, carry, and retrieve!!

     

    The AD-1688 weighing data logger is a handheld device that lets you collect weighing data without connecting the balance or scale to a PC!
    Brochure | Manual Book

    To change the internal settings of the AD-1688, please download the AD-1688 Setting Tool:

    Readme (Please read before downloading the software.)
    AD-1688 Setting Tool (ZIP file 40KB).
    Weighing Data Logger Introduction

  • AD-1689

    Tweezers for Calibration Weight

    The AD-1689 is a pair of tweezers that are ideally suited for manipulating calibration weights (10 ~ 500g).

  • AD-1690

    Leak Tester

    For quick screening for pipette failures!

     

    Are you sure your pipettes are all accurate? Most pipette failures happen due to soiled or damaged parts compromising the airtightness of the pipettes. With the AD-1690 leak tester, you can instantly spot the pipettes that need to be fixed.

    Brochure | Manual Book
    Manual Addendum