WinCT- Plus with Setup Tools Ver. 3.100P
Windows Data Communication Software
Copyright (c) 2013 A&D Company, Limited.

How To Set Up

==============================================================================
WinCT-Plus with Setup Tools
------------------------------------------------------------------------------
This software enables data acquisition from A&D's electronic balances or
platform scales equipped with RS232C, or weighing instruments available for
a LAN, by connecting to a computer.

Please see the descriptions below for the setup of WinCT-Plus and Software
for various setting of OP-08 or AD8526.
Refer to the "Manual.PDF" of the CD-ROM for software operation.
(To read the "Manual.PDF", Adobe Acrobat Reader is necessary.)

==============================================================================
1. Necessary Systems
------------------------------------------------------------------------------
1)Computer: 
    OS          Microsoft Windows XP onwards (English version)
2)Balance equipped with an OP-08(Ethernet Interface) or AD8526(Ethernet 
  Converter.
3)Ethernet hub*
4)LAN cable (straight cable*)
 * If Ethernet hub is not used, cross cables should be used for LAN cabling.
5)Serial cable (for AD8526)

Caution: Before setting up WinCT-Plus, back up important data on the computer 
         for your own safety.

==============================================================================
2. Folder structure of WinCT-Plus
------------------------------------------------------------------------------
+English
   +---WinCT-Plus  : Data acquisition software(Ver1.11P)
   +---Manual(for the AD8526).PDF
   +---Manual(for the OP-08).PDF
   +---Readme.txt
+Japanese
+Setup Tools
   +---DeviceInstaller : Software for various setting (Ver4.3.0.8)
   +---Redirector : Software for establishing a Virtual COM port(Ver4.3.0.2)


==============================================================================
3. Set Up Procedure
------------------------------------------------------------------------------
Quit all applications and insert the "WinCT-Plus" CD-ROM into the CD-ROM drive
of the computer.

(1)Installing "DeviceInstaller" software for setting the OP-08 or AD8526
   "DeviceInstaller" is software to set IP address, etc.

   Installing "DeviceInstaller"(Ver4.3.0.8)
   Execute "setup_di_x86x64cd_4.3.0.8.exe" in "\Setup Tools\
   DeviceInstaller"from the CD-ROM.Follow the instructions to install.

(2)Installing data acquisition software "RsMulti"(Ver.1.10P)
   "RsMulti" is software to collect data from a balance with an OP-08.
   Execute "Setup.exe", "\English\WinCT-Plus" from the CD-ROM.
   Follow the instructions to install.

Refer to the "Manual.PDF" of the CD-ROM for software operation.

===============================================================================
4. License Agreement
-------------------------------------------------------------------------------
  - It is prohibited to reproduce WinCT-Plus without our written consent.
  - Specifications of WinCT-Plus are subject to change for improvement without 
    notice.
  - The copyright of WinCT-Plus is owned by A&D Company, Limited.
  - WinCT-Plus is to be used for data transmission between A&D's weighing 
    instruments and a computer.
  - WinCT-Plus can only be installed and used on the hard disks or other storage 
    device of the computer to be connected to the weighing instrument.
  - A&D Company, Limited assumes no liability at all for direct or indirect and 
    particular or inevitable damage due to defects of WinCT-Plus even though 
    possibility of occurrence of such damage has been notified. Further, 
    A&D assumes no liability for claims of rights from third parties. At the 
    same time A&D assumes no liability at all for software or data losses. 

Microsoft and Windows are registered trademarks or trademarks of Microsoft 
Corporation in the United States and other countries.

================================================================================
5. Uninstalling Program
--------------------------------------------------------------------------------
To uninstall this software, from [Add or Delete Programs].


================================================================================
End of WinCT-Plus Setup explanation
================================================================================


Mar 26, 2012